EVERLIGHT ELECTRONICS CO.,LTD.
Technical Data Sheet 0603 Package Chip LED (0.8mm Height)
19-21SURC/S530-XX/TR8 Features
․Package in 8mm tape on 7〞diameter reel.
․Compatible with automatic placement equipment. ․Compatible with infrared and vapor phase reflow
solder process. ․Mono-color type. ․Pb-free.
․The product itself will remain with in RoHS compliant version.
Descriptions
․The 19-21 SMD LED is much smaller than lead frame type components, thus enable smaller board size, higher packing density, reduced storage space and finally smaller equipment to be obtained.
․Besides, lightweight makes them ideal for miniature applications. etc.
Applications
․Backlighting in dashboard and switch.
․Telecommunication: indicator and backlighting in telephone and fax.
․Flat backlight for LCD, switch and symbol. ․General use.
Device Selection Guide
Part No.
19-21SURC/S530-XX/TR8
Chip Material AlGaInP
Emitted Color Brilliant Red
Resin Color Water Clear
Everlight Electronics Co., Ltd. http://www.everlight.com Rev 3 Page: 1 of 9 Device No:DSE-191-098 Prepared date: 27-Oct-2006 Prepared by: Zhouhua
元器件交易网www.cecb2b.com
EVERLIGHT ELECTRONICS CO.,LTD.
19-21SURC/S530-XX/TR8
Package Outline Dimensions
-+
Note: The tolerances unless mentioned is ±0.1mm, Unit = mm
Everlight Electronics Co., Ltd. http://www.everlight.com Rev 3 Page: 2 of 9 Device No:DSE-191-098 Prepared date: 27-Oct-2006 Prepared by: Zhouhua
元器件交易网www.cecb2b.com
EVERLIGHT ELECTRONICS CO.,LTD.
19-21SURC/S530-XX/TR8
Absolute Maximum Ratings (Ta=25℃)
Parameter Symbol Rating Unit Reverse Voltage Forward Current Peak Forward Current (Duty 1/10 @1KHz) Power Dissipation Electrostatic Discharge(HBM) Operating Temperature Storage Temperature Soldering Temperature
VR 5 IF 25 IFP 60 Pd 60 ESD Topr Tstg Tsol
2000 -40 ~ +85 -40 ~ +90
V mA mA mW V ℃ ℃
Reflow Soldering : 260 ℃ for 10 sec. Hand Soldering : 350 ℃ for 3 sec.
Electro-Optical Characteristics (Ta=25℃)
Parameter
Symbol
*Chip Rank
Min. Typ. Max. Unit Condition
Luminous Intensity Iv
A2 16 39 ----- A3 37 56 ----- mcd A4 51 76 ----- A5 62 94 ----- A6 74 114 ----- IF=20mA
Viewing Angle Peak Wavelength
Dominant Wavelength
2θ1/2 ----- ----- 100 ----- deg λp ----- ----- 632 ----- nm λd ----- ----- 624 ----- nm △λ ----- ----- 20 ----- nm VF IR
Spectrum Radiation Bandwidth Forward Voltage
----- -----
----- 2.0 2.4 V ----- ----- 10 μA
VR=5V
Reverse Current
Everlight Electronics Co., Ltd. http://www.everlight.com Rev 3 Page: 3 of 9 Device No:DSE-191-098 Prepared date: 27-Oct-2006 Prepared by: Zhouhua
元器件交易网www.cecb2b.com
EVERLIGHT ELECTRONICS CO.,LTD.
19-21SURC/S530-XX/TR8
Typical Electro-Optical Characteristics Curves
Spectrum Distribution
Relative luminous intensity(%)10075
Ta=25°CI (mA)50403025201001.2Forward Current vs.Forward Voltage
Ta=25°C5025
0500Forward CurrentF5506006507001.62.02.42.83.0Wavelength λ (nm) Luminous Intensity vs.Relative luminous intensity(%)Relative luminous intensity(%)1000Ambient Temperature1000Forward Voltage V (V)FLuminous Intensity vsForward CurrentTa=25°Cf=1KHzDuty=1/10100
10010
101
-60-40-200204060801001101010Ambient Temperature Ta (°C)Forward Current Derating Curve50I (mA)F4030
2520100020Forward Current I (mA)FRadiation DiagramTa=25°CForward Current406085100Ambient Temperature Ta (°C)
Everlight Electronics Co., Ltd. http://www.everlight.com Rev 3 Page: 4 of 9 Device No:DSE-191-098 Prepared date: 27-Oct-2006 Prepared by: Zhouhua
元器件交易网www.cecb2b.com
EVERLIGHT ELECTRONICS CO.,LTD.
19-21SURC/S530-XX/TR8 Label explanation
CAT: Luminous Intensity Rank HUE: Dom. Wavelength Rank REF: Forward Voltage Rank
Reel Dimensions
Note: Tolerances Unless Dimension ±0.1mm ,Unit = mm
Everlight Electronics Co., Ltd. http://www.everlight.com Rev 3 Page: 5 of 9 Device No:DSE-191-098 Prepared date: 27-Oct-2006 Prepared by: Zhouhua
元器件交易网www.cecb2b.com
EVERLIGHT ELECTRONICS CO.,LTD.
19-21SURC/S530-XX/TR8
Carrier Tape Dimensions: Loaded quantity 3000 PCS per reel
Note: Tolerances Unless Dimension ±0.1mm , Unit = mm
Moisture Resistant Packaging
Everlight Electronics Co., Ltd. http://www.everlight.com Rev 3 Page: 6 of 9 Device No:DSE-191-098 Prepared date: 27-Oct-2006 Prepared by: Zhouhua
元器件交易网www.cecb2b.com
EVERLIGHT ELECTRONICS CO.,LTD.
19-21SURC/S530-XX/TR8
Reliability Test Items And Conditions
The reliability of products shall be satisfied with items listed below. Confidence level：90% LTPD：10%
Test Sample
No. Items Test Condition Ac/Re
Hours/Cycles Size
Temp. : 260℃±5℃
1 Reflow Soldering 22 PCS.0/1 6 Min.
Min. 5sec. H : +100℃ 15min
300 Cycles 2 Temperature Cycle ∫ 5 min
L : -40℃ 15min H : +100℃ 5min
3 Thermal Shock ∫ 10 sec
L : -10℃ 5min
High Temperature
Temp. : 100℃ 4
Storage
Low Temperature
Temp. : -40℃ 5
Storage 6 7
Everlight Electronics Co., Ltd. http://www.everlight.com Rev 3 Page: 7 of 9 Device No:DSE-191-098 Prepared date: 27-Oct-2006 Prepared by: Zhouhua
22 PCS.0/1
300 Cycles 1000 Hrs. 1000 Hrs. 1000 Hrs. 1000 Hrs.
22 PCS.22 PCS.22 PCS.22 PCS.22 PCS.
0/1 0/1 0/1 0/1 0/1
DC Operating Life High Temperature /
High Humidity
IF = 20 mA 85℃/ 85%RH
元器件交易网www.cecb2b.com
EVERLIGHT ELECTRONICS CO.,LTD.
19-21SURC/S530-XX/TR8
Precautions For Use
1. Over-current-proof
Customer must apply resistors for protection , otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage
2.1 Do not open moisture proof bag before the products are ready to use.
2.2 Before opening the package: The LEDs should be kept at 30℃ or less and 90%RH or less. 2.3 After opening the package: The LED's floor life is 1 year under 30℃ or less and 60% RH or less. If unused LEDs remain, it should be stored in moisture proof packages.
2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 60±5℃ for 24 hours.
3. Soldering Condition
3.1 Pb-free solder temperature profile
3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board.
Everlight Electronics Co., Ltd. http://www.everlight.com Rev 3 Page: 8 of 9 Device No:DSE-191-098 Prepared date: 27-Oct-2006 Prepared by: Zhouhua
元器件交易网www.cecb2b.com
EVERLIGHT ELECTRONICS CO.,LTD.
19-21SURC/S530-XX/TR8
4.Soldering Iron
Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. 5.Repairing
Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. EVERLIGHT ELECTRONICS CO., LTD. Tel: 886-2-2267-2000, 2267-9936 Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Fax: 886-2267-6244, 2267-6189, 2267-6306 Tucheng, Taipei 236, Taiwan, R.O.C http://www.everlight.com
Everlight Electronics Co., Ltd. http://www.everlight.com Rev 3 Page: 9 of 9 Device No:DSE-191-098 Prepared date: 27-Oct-2006 Prepared by: Zhouhua
因篇幅问题不能全部显示，请点此查看更多更全内容